Coursera Project Network의 Finite Element Analysis Convergence and Mesh Independence 학습자 리뷰 및 피드백
4.5
별점
79개의 평가
강좌 소개
In this hands-on project, you will learn about the Finite Element Method (FEM) and perform a convergence study using the cloud-based simulation tool SimScale. We will set up a simple simulation case with a provided geometry to learn the fundamentals of the Finite Element Method and how a convergence study is approached in the first place. We will walk through the classical three step process of every simulation which includes the pre-processing, processing and post-processing step.
SimScale is an engineering simulation platform that is revolutionizing the way engineers, designers, scientists, and students design products. The SimScale platform is accessible completely via a standard web browser, with an easy-to-use interface which supports numerous simulation types including solid mechanics (FEM), fluid dynamics (CFD) & thermodynamics.
This course runs on Coursera's hands-on project platform called Rhyme. On Rhyme, you do projects in a hands-on manner in your browser. You will get instant access to pre-configured cloud desktops containing all of the software and data you need for the project, for this project you need no special setup or any data. Everything is already set up directly in your internet browser so you can just focus on learning!
Notes:
- This course works best for learners who are based in the North America region. We’re currently working on providing the same experience in other regions....
최상위 리뷰
필터링 기준:
Finite Element Analysis Convergence and Mesh Independence의 10개 리뷰 중 1~10
교육 기관: Taqi H
•
2023년 1월 5일
The course was very beneficial. especially because the instructor is well versed in the subject and the software. I am now familiarzied with the software and mesh convergence!
교육 기관: Chaitanya U
•
2022년 9월 9일
Very good guided project and an insight to FEA
교육 기관: Alexandru C
•
2022년 8월 5일
Really interesting and straight to the point.
교육 기관: Philip R C
•
2022년 10월 17일
Helpful one, recommended to all engineers
교육 기관: CHATURVEDI A U
•
2022년 7월 31일
very helpfull
교육 기관: Ignacio C
•
2021년 12월 29일
Good course!
교육 기관: B.L K
•
2022년 8월 2일
NN
교육 기관: Utku K
•
2022년 11월 14일
Very good introduction to meshing and FEM analysis